Skip to content

Fasteners

Weld Mount is a bonded fastener system; including adhesives, applicators and hardware.  It provides the ability to mount parts that would typically require a hole being drilled and fastened with a traditional "nut and bolt", with no hole.  

If you want to mount something to the hull of a boat or the outside shell on a trailer or van, simply glue up a threaded stud and hang your new part.  Need to tidy up some wire and / or plumbing?  No problem use the wire tie mounts and / or the threaded studs with hose / cable mounts.  

  • Weld Mount AT-5; Large Wire Tie Mounts

    Weld Mount
    from $14.99

    The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire ti...

    View full details
    from $14.99
  • Sold out

    Weld Mount AT-850; Mixing Tip

    Weld Mount
    from $16.99

    AT-850 tip is for use with: AT-2010 AT-8040 It’s unique design eliminates any possibility of the cartridge plugging up as the entry is separa...

    View full details
    from $16.99
    Sold out
  • Weld Mount AT-3; Small Wire Tie Mounts

    Weld Mount
    from $14.99

    The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with ...

    View full details
    from $14.99
  • Weld Mount AT-2010; Acrylic Adhesive

    Weld Mount
    from $32.99

    Weld Mount AT-8040 is a solvent free, VOC Compliant, two part methacrylate-based, structural adhesive formulated to bond metals for use in severe e...

    View full details
    from $32.99
  • Sale

    Weld Mount AT-8040; No Slide Multi Bonder

    Weld Mount
    from $19.99

    Weld Mount AT-8040 is a solvent free, VOC Compliant, two part methacrylate-based, structural adhesive formulated to bond metals for use in severe e...

    View full details
    from $19.99
    Sale
  • Threaded Studs: #8-32

    Weld Mount
    from $18.99

    These small panel studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels or for mounting to the con...

    View full details
    from $18.99
  • from $23.99
  • Sold out

    Weld Mount AT-880; Polypropylene Bonder

    Weld Mount
    from $39.99

    Weld Mount AT-880 is the newest adhesive in the Weld Mount System.  It is designed to bond plastics, metals and rubbers; which have been challengin...

    View full details
    from $39.99
    Sold out
  • from $27.99
  • Sold out

    Weld Mount Adhesively Bonded Fastener Kit

    Weld Mount
    from $89.99

    The AT-65100 Adhesively Bonded Fastener Kit Has a Variety Of Weld Mount Parts Designed To Give The User The Chance To Try Our Weld Mount System At ...

    View full details
    from $89.99
    Sold out
  • Weld Mount AT-858; Mixing Tip for AT-880 Adhesive

    Weld Mount
    from $16.99

    AT-858 tip is for use with: AT-880 It’s unique design eliminates any possibility of the cartridge plugging up as the entry is separated.  This pr...

    View full details
    from $16.99
  • Nut Plates

    Weld Mount
    from $54.99

    Floating nut plates are designed for thru hole and blind mounting applications. The rubber fixture holds the part in place while it is bonded in pl...

    View full details
    from $54.99
  • Weld Mount AT-388; Adhesive Dispensing Gun

    Weld Mount
    $79.99

    The AT-388 Adhesive dispensing gun comes with a 10:1 plunger. For Use With 50mL Cartridges of: AT-880 Note: The AT-388 will ONLY work with the AT...

    View full details
    $79.99
  • Sold out

    Weld Mount AT-8; Aluminum Wire Tie Mount - Small

    Weld Mount
    from $21.99

    Used with Stainless Steel or Nylon wire ties up to “0.35” inches wide.  50 lbs. tensile strength when bonded with AT-6030 adhesive.  Manufactured o...

    View full details
    from $21.99
    Sold out
  • Sold out

    Weld Mount Executive Kit

    Weld Mount
    from $199.99

    The AT-1001003 Executive Adhesive and Fastener Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full S...

    View full details
    from $199.99
    Sold out
  • Weld Mount AT-301; Adhesive Dispensing Gun

    Weld Mount
    $59.99

    The AT-301 Adhesive dispensing gun comes with a 10:1 plunger. For Use With 50mL Cartridges of: AT-6030 Note: The AT-301 will ONLY work with the A...

    View full details
    $59.99
  • Weld Mount AT-7; Aluminum Wire Tie Mount - Swivel

    Weld Mount
    from $62.99

    This tie mount is provided with an anodized aluminum base with a nylon tie mount which is riveted to the base. The nylon mount swivels 360 degrees ...

    View full details
    from $62.99
  • Sold out

    Weld Mount AT-300; Adhesive Dispensing Gun

    Weld Mount
    $59.99

    The AT-300 Adhesive dispensing gun comes with a 1:1 plunger. For Use With 50mL Cartridges of: AT-2010 AT-8040 Note: The AT-300 will not work ...

    View full details
    $59.99
    Sold out
  • Sold out

    Weld Mount Industrial Kit

    Weld Mount
    from $289.99

    AT-7001 Industrial Fastener Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For Industrial Maintenance Shops....

    View full details
    from $289.99
    Sold out
  • Sold out

    Weld Mount AT-6030; Metal/Carbon Bonder

    Weld Mount
    from $32.99

    AT-6030 is a 10 to 1 metal bonding adhesive. It has high viscosity and cures in 10 - 12 minutes, has a 6 minute working time and develops working s...

    View full details
    from $32.99
    Sold out
  • Weld Mount AT-650; Mixing Tip

    Weld Mount
    $16.99

    AT-650 tip is for use with: AT-6030

    $16.99
  • Sold out

    Weld Mount AT-9; Aluminum Wire Tie Mount - Large

    Weld Mount
    from $26.99

    Used with Stainless Steel or Nylon wire ties up to 0.4 inches wide. 250 lbs tensile strength when bonded with AT-6030 adhesive. Manufactured of 505...

    View full details
    from $26.99
    Sold out
  • Cable & Hose Clamps

    Weld Mount
    from $18.99

    Weld Mount cable and hose clamps are available as single or double units. Each is designed to be mounted using our ¼" x 20 Weld Mount studs. The ch...

    View full details
    from $18.99
  • Threaded Standoffs

    Weld Mount
    from $49.99

    Weld Mount stainless steel female threaded standoffs mount to virtually any surface. These standoffs are .75” tall with a 1.25” diameter base. Like...

    View full details
    from $49.99
  • Sold out

    Threaded Studs: Heavy Duty

    Weld Mount
    from $12.99

    The HS200 stud is designed for heavy load applications such as mounting filters and panels. The stud is inertial (friction) welded to a 2" base pla...

    View full details
    from $12.99
    Sold out